|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy 10ft Bunk Feeder Base |
|
|
|
|
|
 |
|
|
|
|
|
|
- 20 inches in height
- Consist of 1.75" O.D. round tubular steel
- 34.25 inches in width
- Base runners are 90 inches in length
- Four support members under liner for extra stability
- All feeders have drain holes.
- Feeders are available painted or galvanized
|
|
|
|
|
|
|
|
Liner |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Depth 11.25 inches
- Inside length 114 inches
- Inside width 22.5 inches
|
|
 |
|
|
|
|
|
|
|
|
|
Calf Pass Thru Panel |
|
|
|
|
|
|
|
|
|
|
|
|
- 62 inches in height
- Consist of 1.75" O.D. round tubular steel
- 4 horizontal bars
- Horizontal bar is mechanically adjustable; allows only calves to pass through
- Custom vertical bars to meet specific needs
- The number of separation bars vary according to the length of the panel
- Attaches to corral panels
- Drop-In Pin System
- Heavy duty series
- Available in lengths from 4' to 16' in 2' intervals
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
- 50 inches in height
- Consists of 1.75" O.D. round tubular steel
- 6 Horizontal bars
- The solid bottom is reinforced by 4 horizontal bars and 7 gauge flat braces
- Solid bottom height is 18.75", also available in open bottom
- The "S" bar is welded between the solid bottom and the 2nd from the top horizontal bar allowing for a 19.5" vertical opening
- The solid bottom and S bars reduce hay waste.
- Horizontal location of S bars can be altered upon request
- Drop-in pin system provides quick and easy installation
- Available in lengths from 4' to 16' in 2' intervals
|
|
|
|
|
|
|
|
Drop-in Pin System
|
|
|
|
|
- Pins are formed to help prevent sharp edges and injury
- The ends are stamped and flat washers are placed on the pins to prevent disconnecting
- Connectors are formed from 7 gauge heavy steel
- Provides quick and easy installation
|
|